Description
The Keysight X281C adapter transforms waveguide transmission line into 50-ohm coaxial line. Power can transmitted in either direction, and each adapter covers the full frequency range of its waveguide band with SWR less than 1.3.
NewRent
KEYSIGHT X281C Coaxial to waveguide WR-90 adapter, 8.2 to 12.4 GHz
The Keysight X281C transforms X-band (8.2 GHz to 12.4 GHz) waveguide transmission line into 50-ohm coaxial line.
YOU MAY ALSO BE INTERESTED IN
NewRent
Close
KEYSIGHT 81645A Filler Module for 8164B Mainframe
The Keysight 81645A Filler Module must be used if you have not installed a back-loadable Tunable Laser module into the Keysight 8164A/B Lightwave Measurement System.
NewRent
Close
KEYSIGHT 81635A Power Sensor Module (dual Channel)
The Keysight 81635A provides two power sensor channels in a single-slot module for reduced footprint in multichannel measurement setups.
NewRent
Close
KEYSIGHT 81626B High Power InGaAs Optical Head, 27dBm
A built-in calibrated filter allows this head with InGaAs detector to measure power up to +27 dBm.
NewRent
Close
KEYSIGHT 81624B InGaAs Optical Head, 5mm Diameter
This power head with cooled 5mm InGaAs detector provides highest accuracy performance from 800-1700nm.
NewRent
Close
KEYSIGHT 8163B Lightwave Multimeter, Mainframe
The Keysight Technologies 8163B lightwave multimeter consist of 2 compact module slots and a graphical interface. Update: remote programming can now use the LAN or GPIB interface.
NewRent
Close
KEYSIGHT 81630B High Power Sensor Module, 28dBm
The Keysight 81630B provides measurement of high power levels in the convenient front-panel input format of the sensor modules. For measuring lasers and transmitters beyond 10mW, this is the sensor to choose.
NewRent
Close
KEYSIGHT 81619A Interface Module (two channels)
Interface Module to connect optical heads (8162x) to mainframe 8163A/B, 8164A/B or 8166A/B
NewRent
Close
KEYSIGHT 81655A Laser Source Module (FP) 1310nm, 13dBm
To take the uncertainty out of monitoring loss over long periods of time, Keysight's 81655A 1310nm Fabry Perot source is stabilized and very insensitive to backreflections.
