Showing all 12 results

Show sidebar
NewRent
Close
NewRent
Close

KEYSIGHT 85138A 2.4mm 50 ohm termination. Male connector

The 85138A is a precision, low-reflection dc to 50 GHz load with 2.4mm male connector for terminating a 50-ohm coaxial system in its characteristic impedance.
NewRent
Close

KEYSIGHT 85138B 2.4 mm 50 ohm termination. Female conn.

The Keysight 85138B is a precision, low-reflection dc to 50 GHz load for terminating a 50-ohm coaxial system in its characteristic impedance.
NewRent
Close

KEYSIGHT 85140A 2.4 mm short circuit, Male connector

The 85140A coaxial short with 2.4 mm male connector is used for establishing measurement planes for known reflection phase and magnitude in 50-ohm coaxial systems.
NewRent
Close

KEYSIGHT 85140B 2.4 mm short circuit, Female connector

The 85140B coaxial short with 2.4 mm female connector is used for establishing measurement planes for known reflection phase and magnitude in 50-ohm coaxial systems.
NewRent
Close

KEYSIGHT 85141A 2.4 mm open circuit, Male connector

The Keysight 85141A coaxial open is used for establishing measurement planes for known reflection phase and magnitude in 50-ohm coaxial systems.
NewRent
Close

KEYSIGHT 85141B 2.4 mm open circuit, Female connector

The Keysight 85141B coaxial open is used for establishing measurement planes for known reflection phase and magnitude in 50-ohm coaxial systems.

KEYSIGHT 909A Coaxial termination, APC-7, dc-18 GHz

The Keysight 909A is a general-purpose, low-reflection load for terminating a 50-ohm coaxial system in its characteristic impedance over the dc to 18 GHz range.
NewRent
Close

KEYSIGHT 909C Coaxial 50 Ohm Termination

The Keysight 909C is a precision, low-reflection dc to 2 GHz load for terminating a 50-ohm coaxial system in its characteristic impedance. It is intended for use as a calibration standard.

KEYSIGHT 909D Coaxial termination, DC-26.5 GHz, APC 3.5 mm connector

The Keysight 909D is a precision, low-reflection dc to 26.5 GHz load for terminating a 50-ohm coaxial system in its characteristic impedance
NewRent
Close

KEYSIGHT 909E Coaxial termination, dc-3 GHz

The Keysight 909E is a precision, low-reflection dc to 3 GHz load for terminating a 75-ohm coaxial system in its characteristic impedance.
NewRent
Close

KEYSIGHT 909F Precision Coaxial Termination, DC to 18 GHz

The Keysight 909F family of precision low reflection loads are intended for use as calibration standards. Tantalum nitride on sapphire thin-film technology is used for exceptional long-term impedance stability.

Datasheet